Evaluation of the Bond Strength of Universal Adhesive Systems after Application of 2% Chlorhexidine

Authors

Keywords:

universal adhesive, chlorhexidine, bond strength in dentin.

Abstract

Introduction: The influence of chlorhexidine on the bond strength of adhesive systems is still very controversial.

Objective: To determine the bond strength of two universal adhesives on dentin after application of 2% chlorhexidine at different application times.

Methods: Thirty incisors were used and the vestibular surface was abraded to expose the dentin. Subsequently, they were randomly divided into six groups (n = 5). Single Bond Universal (SBU) and All-Bond Universal (ABU) adhesives with/without chlorhexidine were used. Group SBU-0: Single Bond Universal; Group SBU-30: chlorhexidine for 30 seconds + Single Bond Universal; Group SBU-60: chlorhexidine for 60 seconds + Single Bond Universal; Group ABU-0: All-Bond Universal; Group ABU-30: chlorhexidine for 30 seconds + All-Bond Universal and Group ABU-60: chlorhexidine for 60 seconds + All-Bond Universal. Adhesive strength was analyzed by two-factor mixed ANOVA and Tukey's post hoc (p < 0.05).

Results: The bond strength for the SBU-60 group increased significantly with respect to the control group (p = 0.032). Similarly, for the ABU-30 and ABU-60 groups, the bond strength increased significantly with respect to the control group (p = 0.001) and (p = 0.000), respectively.

Conclusion: Pre-application of 2% chlorhexidine for 60 seconds increases the bond strength of Single Bond Universal and All-Bond Universal adhesive systems.

Downloads

Download data is not yet available.

Author Biographies

María LLashag Bello, Universidad Científica del Sur, Facultad de Estomatología. Lima, Perú.

Lic. Cirujano Dentista

Marcia Edith Vidalón Pinto, Universidad Científica del Sur, Facultad de Ciencias de la Vida y Salud, Carrera de Estomatología. Lima, Perú.

Magister en estomatología

References

Kazemi H, Saeed M, Rezaei S. Effect of Chlorhexidine on durability of two self-etch adhesive systems. J Clin Exp Dent. J Clin Exp Dent. 2020;12(7):663–9.

Sharafeddin F, Salehi R, Feizi N. Effect of Dimethyl Sulfoxide on Bond Strength of a Self-Etch Primer and an Etch and Rinse Adhesive to Surface and Deep Dentin. J Dent. 2016;17(3):242–9.

Frassetto A, Breschi L, Turco G, Marchesi G, Di Lenarda R, Tay FR, et al. Mechanisms of degradation of the hybrid layer in adhesive dentistry and therapeutic agents to improve bond durability--A literature review. Dent Mater. 2016;32(2):e41-53.

Firouzmandi M, Khashaei S. Knoop Hardness of Self-Etch Adhesives Applied on Superficial and Deep Dentin. J Dent (Shiraz, Iran). 2020;21(1):42–7.

Maravić T, Comba A, Cunha S, Angeloni V, Cadenaro M, Visinitini E, et al. Long-term bond strength and endogenous enzymatic activity of a chlorhexidine-containing commercially available adhesive. J Dent. 2019;84:60–6.

Hardan L, Bourgi R, Kharouf N, Mancino D, Zarow M, Jakubowicz N, et al. Bond Strength of Universal Adhesives to Dentin: A Systematic Review and Meta-Analysis. Polym. 2021;13(5).

Fehrenbacha J, Aldrighi E, P ereira C. Is the presence of 10-MDP associated to higher bonding performance for self-etching adhesive systems? A meta-analysis of in vitro studies. Dent Mater. 2021;37(10):1463–85.

Digole V, Warhadpande M, Dua P, Dakshindas D. Comparative evaluation of clinical performance of two self-etch adhesive systems with total-etch adhesive system in noncarious cervical lesions: An in vivo study. J Conserv Dent. 2020;23(2):190–5.

Lima JFM de, Wajngarten D, Islam F, Clifford J, Botta AC. Effect of adhesive mode and chlorhexidine on microtensile strength of universal bonding agent to sound and caries-affected dentins. Eur J Dent. 2018;12(4):553–8.

Rayar S, Sadasiva K, Singh P, Thomas P, Senthilkumar K, Jayasimharaj U. Effect of 2% Chlorhexidine on Resin Bond Strength and Mode of Failure Using Two Different Adhesives on Dentin: An In Vitro Study. J Pharm Bioallied Sci. 2019;11(2):S325–30.

Tessore R, Silveira C, Vázquez P, Mederos M, García A, Cuevas C, et al. Evaluación de la resistencia de unión a dentina humana de un sistema adhesivo universal con clorhexidina utilizado en modo de grabado total y autocondicionante. Odontoestomatología. 2020;22(35):20–9.

Kiremitçi A, Yalçin F, Gökalp S. Bonding to enamel and dentin using self-etching adhesive systems. Quintessence Int. 2004;35(5):367–70.

Mandri M, Aguirre A, Zamudio M. Sistemas adhesivos en Odontología Restauradora. Odontoestomatología. 2015;17(26):50–6.

Dos Santos RA, de Lima EA, Montes MAJR, Braz R. Pre-treating dentin with chlorhexadine and CPP-ACP: self-etching and universal adhesive systems. Acta Biomater Odontol Scand. 2016;2(1):79–85.

Bravo C, Sampaio C, Hirata R, Puppin R, Mayoral J, Giner L. In-vitro Comparative Study of the use of 2 % Chlorhexidine on Microtensile Bond Strength of Different Dentin Adhesives: A 6 Months Evaluation. Int J Morphol. 2017;35(3):893–900.

Fernandes GL, Strazzi-Sahyon HB, Suzuki TYU, Briso ALF, Dos Santos PH. Influence of Chlorhexidine Gluconate on the Immediate Bond Strength of a Universal Adhesive System on Dentine Subjected to Different Bonding Protocols: An In Vitro Pilot Study. Oral Health Prev Dent. 2020;18(1):71–6.

Jing D-B, Wang L-Q, Hu Y-F, Zhu J. [Effect of chlorhexidine on the bonding effect of self-acid adhesive to pre-treatment dentin]. Shanghai Kou Qiang Yi Xue. 2020;29(2):150–4.

Geng R, Cardoso R, Sousa A, Chinelatti M, Vicenti S, Tonani R, et al. Effect of thermo-mechanical cycling and chlorhexidine on the bond strength of universal adhesive system to dentin. Heliyón. 2020;6(4).

Gunaydin Z, Yazici AR, Cehreli ZC. In Vivo and In Vitro Effects of Chlorhexidine Pretreatment on Immediate and Aged Dentin Bond Strengths. Oper Dent. 2016;41(3):258–67.

Tekçe N, Tuncer S, Demirci M, Balci S. Do matrix metalloproteinase inhibitors improve the bond durability of universal dental adhesives? Scanning. 2016;38(6):535–44.

Shadman N, Farzin-Ebrahimi S, Mortazavi-Lahijani E, Jalali Z. Effect of chlorhexidine on the durability of a new universal adhesive system. J Clin Exp Dent. 2018;10(9):e921–6.

García V, Hamdan T, Bellot C, Paredes V, Pascual A, Almerich JM, et al. Effect of 2% Chlorhexidine Following Acid Etching on Microtensile Bond Strength of Resin Restorations: A Meta-Analysis. Med. 2019;55(12):769.

Loguercio AD, Hass V, Gutierrez MF, Luque-Martinez IV, Szezs A, Stanislawczuk R, et al. Five-year Effects of Chlorhexidine on the In Vitro Durability of Resin/Dentin Interfaces. J Adhes Dent. 2016;18(1):35–42.

Sinha DJ, Jandial UA, Jaiswal N, Singh UP, Goel S, Singh O. Comparative evaluation of the effect of different disinfecting agents on bond strength of composite resin to dentin using two-step self-etch and etch and rinse bonding systems: An in-vitro study. J Pharm Bioallied Sci. 2018;21(4):424–7.

Rascão B, Coelho A, Amaro I, Marcelino I, Paula A, Saraiva J. Effect of Cavity Disinfectants on Dentin Bond Strength and Clinical Success of Composite Restorations-Review de Estudios In Vitro, In Situ y Clínicos. Int Sci. Int J Mol Sci. 2020;22(1):353.

Utria J, Pérez E, Rebolledo M, Vargas A. CARACTERÍSTICAS DE LAS SOLUCIONES DE CLORHEXIDINA AL 2% Y AL 0,2% EN PREPARACIONES CAVITARIAS EN ODONTOLOGÍA: UNA REVISIÓN. Duazary. 2018. 15(2):1-14.

Puspitasari D, Herda E, Soufyan A. Effect of 2% chlorhexidine gluconate on the degradation of resin composite–dentin bond strength when using self-etch adhesive systems. Int. J. Appl. Pharm. 2017; 945 - 50.

Nichitani Y, Yoshima M, Wadgaonkar B. Activation of gelatinolytic / collagenolytic activity in dentin by self-etching adhesives. Eur J Oral Sci. 2006; 1114:160-166.

Published

2024-04-24

How to Cite

1.
LLashag Bello M, Vidalón Pinto ME. Evaluation of the Bond Strength of Universal Adhesive Systems after Application of 2% Chlorhexidine. Rev Cubana Estomatol [Internet]. 2024 Apr. 24 [cited 2025 Feb. 5];61:e4843. Available from: https://revestomatologia.sld.cu/index.php/est/article/view/4843

Issue

Section

Research Article

Similar Articles

You may also start an advanced similarity search for this article.