Negative maxillary transverse discrepancy and cephalometric lateral differences according to the width of upper arch
Keywords:
posterior crossbite, maxillary hypoplasia, mandibular transversal excess, orthognathic surgeryAbstract
Introduction: Negative maxillary transverse discrepancy is not exclusive to narrow upper arch. The transverse discrepancy due to maxillary deficiency is well described, but this is not the case when the maxilla displays adequate dimensions and the origin of the problem is an excess of mandibular width.
Objective: To describe the cephalometric characteristics of negative maxillary transverse discrepancy present in narrow upper arches with those of normal or increased width.
Methods: An observational and cross-sectional study was carried out in records of patients with negative maxillary transverse discrepancy. The cases referred to the maxillofacial surgery department at Hospital Clínico Quirúrgico “Hermanos Ameijeiras” between January 2016 and January 2020 were selected. The initial study models were measured and two groups were formed: those with a distance between central fossae of 16 to 26, less than 47 mm and the other with equal or greater values. Lateral cephalometric analysis of Ricketts, McNamara, Björk & Jarabak, Burstone and soft profile were performed on the initial teleradiographs. Using the Mann Whitney U test of independent samples, measurements with statistically significant differences between both groups were selected. (p <0.05).
Results: Significant differences were found regarding the cranial-mandibular relationship, mandibular anatomy, maxillo-mandibular relationship and occlusal relationship. The most important differences observed in each group were respectively: S-Ar / Ar-Go ratio (p = 0.033), mandibular body length (p = 0.01), mandibular-maxillary difference (p = 0.003) and overjet (p = 0.043).
Conclusions: In the studied patients, negative maxillary transverse discrepancy has the same probability of presenting a wide or in norm upper arch, as well as a narrow arch. In the first case, it is more likely to find jaws with increased body length, a skeletal class III pattern and a concave profile; in the second case, the tendency is to present small jaws with increased articular angle and dental overjet.
Downloads
References
Leonardi R, Lo Giudice A, Rugeri M, Muraglie S, Cordasco G, Barbato E. Three-dimensional evaluation on digital casts of maxillary palatal size and morphology in patients with functional posterior crossbite. European Journal of Orthodontics [Internet]. 2018 [cited 2020 ago10]; 40(5):[aprox. 7 p.]. Available from: https://academic.oup.com/ejo/article/40/5/556/4883188.
Alleman M, Steinbacher DM. Width and Transverse Problems. In: Steinbacher DM, editor. Aesthetic Orthognathic Surgery and Rhinoplasty. Connecticut, USA: Wiley-Blackwell; 2019. p. 145-73.
McNamaraa JA. Maxillary transverse deficiency. American Journal of Orthodontics and Dentofacial Orthopedics [Internet]. 2000 [cited 2020 Jul 22]; 117(5):[aprox. 4 p.]. Available from: https://doi.org/10.1016/S0889-5406(00)70202-2.
De Clerck HJ, Proffit WR. Growth modification of the face: A current perspective with emphasis on Class III treatment. American Journal of Orthodontics and Dentofacial Orthopedics [Internet]. 2015 [cited 2020 Jul 22]; 148(1):[aprox. 10 p.]. Available from: https://www.ajodo.org/article/S0889-5406(15)00530-2/fulltext.
Zhang K, Huang L, Yang L, Xu L, Xue C, Xiang Z, et al. Effects of transverse relationships between maxillary arch, mouth, and face on smile esthetics. The Angle Orthodontist [Internet]. 2015 [cited 2020 ago20]; 86(1):[aprox. 7 p.]. Available from: https://doi.org/10.2319/101514.1.
Hara S, Mitsugi M, Hirose H, Tatemoto Y. Combination of Mandibular Constriction and Intraoral Vertical Ramus Osteotomies for a Transverse Jaw Discrepancy. Plast Reconstr Surg Glob Open [Internet]. 2015 [cited 2020 ago18]; 3(9):[aprox. 10 p.]. Available from: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4596446/.
Alexander CD, Bloomquist DS, Wallen TR. Stability of mandibular constriction with a symphyseal osteotomy. American Journal of Orthodontics and Dentofacial Orthopedics [Internet]. 1993 1993/01/01/ [cited 2020 ago17]; 103(1):[aprox. 9 p.]. Available from: http://www.sciencedirect.com/science/article/pii/088954069370099A.
Bloomquist D. Mandibular narrowing: advantage in transverse problems. Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons [Internet]. 2004 Mar [cited 2020 ago24]; 62(3):[Aprox. 4 p.]. Available from: https://www.joms.org/article/S0278-2391(03)01125-X/fulltext.
Gregoret J, Tuber E, Escobar P LH, Matos da Fonseca A. Ortodoncia y cirugía ortognática. Barcelona: ESPAXS,SA; 1997.
Gong A, Li J, Wang Z, Li Y, Hu F, Li Q, et al. Cranial base characteristics in anteroposterior malocclusions: A meta-analysis. The Angle Orthodontist [Internet]. 2015 [cited 2020 ago17]; 86(4):[aprox. 13 p.]. Available from: https://doi.org/10.2319/032315-186.1.
Hasebe A, Yamaguchi T, Nakawaki T, Hikita Y, Katayama K, Maki K. Comparison of condylar size among different anteroposterior and vertical skeletal patterns using cone-beam computed tomography. The Angle Orthodontist [Internet]. 2018 [cited 2020 ago16]; 89(2):[aprox. 6 p.]. Available from: https://doi.org/10.2319/032518-229.1.
Kajii TS, Fujita T, Sakaguchi Y, Shimada K. Osseous changes of the mandibular condyle affect backward-rotation of the mandibular ramus in Angle Class II orthodontic patients with idiopathic condylar resorption of the temporomandibular joint. CRANIO® [Internet]. 2019 2019/07/04 [cited 2020 ago26]; 37(4):[aprox. 9 p.]. Available from: https://doi.org/10.1080/08869634.2017.1421446.
Wang MF, Otsuka T, Akimoto S, Sato S. Vertical facial height and its correlation with facial width and depth: Three dimensional cone beam computed tomography evaluation based on dry skulls. International journal of stomatology & occlusion medicine [Internet]. 2013 [cited 2020 ago 8]; 6(4):[aprox. 10 p.]. Available from: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3835924/.
Awad AM, Gaballah SM, Gomaa NE. Relationship between cranial base and jaw base in different skeletal patterns. Orthodontic Waves [Internet]. 2018 2018/06/01/ [cited 2020 ago26]; 77(2):[aprox. 9 p.]. Available from: http://www.sciencedirect.com/science/article/pii/S1344024117301905.
Farheen F, Mubassar F. The assessment of resting tongue posture in different sagittal skeletal patterns. Dental Press Journal of Orthodontics [Internet]. 2019 [cited 2020 ago17]; 24:[aprox. 9 p.]. Available from: http://www.scielo.br/scielo.php?script=sci_arttext&pid=S2176-94512019000300055&nrm=iso.
Published
How to Cite
Issue
Section
License
Authors retain all rights to their works, which they can reproduce and distribute as long as they cite the primary source of publication.
The Rev Cubana Estomatol is subject to the Creative Commons Attribution-Non-Commercial 4.0 International License (CC BY-NC 4.0) and follows the publication model of SciELO Publishing Schema (SciELO PS) for publication in XML format.
You are free to:
- Share — copy and redistribute the material in any medium or format.
- Adapt — remix, transform, and build upon the material.
The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
- You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
- No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.